Transfer Track Help - CoasterBuzz

Does anyone out there that knows how to make a transfer track, just for looks, using the beast trainer?

-----------------
Out of all the things I've lost, I miss my mind the most!

You don't need the beast trainer, just put in the transfer track where it should be. It isn't hard. There is no way to make a working one.

I think he means a transfer track, with a train on it. I have also been wondering that.

It's really easy. Here's how.

1. Open up the Beast Trainer 2.3 and RCT

2. Select "Begin Special Build Mode" on the BT

3. Build a station long enough for how ever many trains you want on the transfer track.

4. Go to the BT and go to "Modify Ride Options". Then, select the coaster and set it to a powered launch mode. Set the launch at zero.

5. Go back to RCT and hit the test button. Immediatly after you hit it, click the close button once so the train stays on the track.

6. Go to the BT and under "Execute Special Build Mode", select "Execute Sink Scenery". Zoom out then zoom back in to let the screen reload. The train should appears as if floating . Then hit "End Special Build Mode".

7. When building the coaster that goes with the extra train, just build the track under the train. It will just go under as if building regular track.

Hope that helps. I could never find a tutorial anywhere until somebody told me.

-----------------
If you like Wicked Twister in the back, does that mean you like to get screwed in the rear?

That would be awsome if in RCT 2 there were real working transfer tracks.

Thank you very much SpongeBobAlex!

-----------------
Out of all the things I've lost, I miss my mind the most!