A'ight, so I'm using the Dragon Trainer, and I started building this park. So I wanted to move the entrance to the other side of the park, so I did, and then I moved the footpath over to that side, too, and clicked rebuild park map to have the footpath connect to the outside world, so my guests could get in. However, when they come in, they barely even go onto the footpath, and then stop walking. They then build up and cause complete chaos. So what I did was I deleted the footpath, so they could move around a little, and hoped some of them would go onto the next footpath, of which they did. But then, they would barely go far at all before they would turn around and go back. Does anybody know why or how to fix this?
-----------------
Cedar Point: America's Rockin' Roller Coast!
Make sure the path leading to your new enterance is not owned by you.
Are the peeps entering the park? If not you put the enterance in backwards.:) (Don't worry I did it too) When you connect the path going off the map make sure you delete the other one.
-----------------
Visits to Knoebels in 2002: 8
-----------------
Cedar Point: America's Rockin' Roller Coast!
You need to change the land type (grass, rock, sand, etc) to one thats not in your park for the path I usually use the green gridlines. Before you change ownership you need to add a path over it to the end of the map. Once that's done go to the change ownership again then switch back to grass then hit own. That way you can remove the old enterance walk way. Just remember that the giraffe's must face toward the walkway to the park (NOT into the park).
-----------------
Visits to Knoebels in 2002: 8
-----------------
Cedar Point: America's Rockin' Roller Coast!
-----------------
Cedar Point: America's Rockin' Roller Coast!
-----------------
You want to know what Millenium Force is on a scale from 1-10? Oh, that's easy. A bajillion out of ten.
HMMMM? Try removing the original path. Make sure you don't own the land under where your new enterance walkway is. Also try to remove all the peeps. Make sure that the only path that goes to the end of the map is the one that leads to your enterance.
*Edit* Follow this exactly and you should be good to go.
1. put the giraffe's where you want your new enterance
2. pick the type of path you want under your new enterance then click on the move enterance button
3. change the land type under where you want the new enterance path to lead (rock, dirt, grids, etc)
4. Add the walk way on those tiles.
5. Now change the ownership to "not own" for whatever tile you picked under the new enterance way.
6. now go back to the change ownership screen again and pick "own" and select the type that was under the old enterance way.
7. You should be ready to go, now
It sounds like you didn't change the ownership from the original enterance. When you do it right you should see the fence with the signs around the area you don't own.
If that doesn't help you try looking at the help section on the trainer.
-----------------
Visits to Knoebels in 2002: 10
*** This post was edited by coasterpunk on 9/1/2002. ***
You must be logged in to post