In responding to another post, I was thinking about Ninja @ SFMM. I remembered thinking that the station seemed odd until I realized that there is a slight bend (10-15 degrees?) in the track in the middle of the loading platform.
Does anyone know of any other coasters out there with this feature??
Thanks,
EV
-----
"Just remember, wherever you go, there you are." - Buckaroo Banzai
-----------------
- Peabody
Back when she had the hand brakes, it either curved just before unload, or in-between unload and load.
The part about Ninja that surprised me was that the bend was in the middle of the loading gates!
Later,
EV
-----
"Just remember, wherever you go, there you are." - Buckaroo Banzai
*** This post was edited by EchoVictor on 1/23/2002. ***
The Comet at Hershey had one for years until the re-did the station.
Shaggy
-----------------
Shaggy
A.K.A. John K.
See, wherever you have fin brakes there has to be straight track. You can put a bend in the middle of the station, but the bend has to be between brake calipers. Knoebel's Whirlwind has that, if I remember correctly. Graceful curving stations as seen on the Sea Dragon at Wyandot Lake or the Comet at Waldameer or the Little Dippers up in Chicago, or on the Knoebel's Twister require the use of skid brakes.
--Dave Althoff, Jr.
Who likes curved stations.
Zimm
--------
Theme Park Brochures and Maps
RideMan said:
CP's Blue Streak had a bend just downtrack of the loading area, but from the back of Car #1 it is and has always been straight all the way to the back of unload, then there is a curve between unload and the holding brake. Luckily it wasn't any more than that 'cause if it had been, they would have had to hack it up more than they did to convert to fin brakes.
--Dave Althoff, Jr.
Who likes curved stations.
There is no curve between the unload and load. The transfer track is there. The curve starts where the first car used to be loaded, at the front of the station. They really ruined that ride!
OOps! My fault, wasn't reading your post clearly, Dave. Yeah, I guess since there is now a "holding brake," there is a curve between that and unload/load. They still totally ruined the ride :(
-----------------
Ow! My lap bar IS down all the way.
*** This post was edited by coasterbill73 on 1/23/2002. ***
*** This post was edited by Wackokid on 1/23/2002. ***
Wackokid said:
i thnk the H Mler has a 90° bend at the end wth the first car
blah
*** This post was edited by Wackokid on 1/23/2002. ***
I read your post 6 times and I still don't get it. Maybe I'm slow...
You must be logged in to post