The Villain and The boss

I would like to know if any one could tell me the ride whole ride layout of the boss and the villain. I would like to recreat those rides in rct2. And the beast.

Any one Know?

Villain. station, small drop and left hand turn to lift.

Lift hill,drop (into good headchoppers) ,camelback, trick track, camelback, up to typical CCI sweeping turnaround. Turnaround turns so track leaving turnaround is close to track entering turnaround. looks like a tight squeeze. then a dive curving to the right, several smaller hills (not sure, 3-5), followed by camera, then steep hill to turnaround . Turnaround is ajacent to lift hill's peak if you were to draw a line straight down and view from the side. After turning, there is a long straightaway before it drops (into good headchoppers) and does 2-3 smaller hills before entering a tightly banked and I think downward swooping turn located directly underneath the big turnaround. Then about 3 bunny hopps until you go up and into the brakerun, then straight into the station.

Pictures (RCDB, listed in order they appear on site)

Second camelback: http://rcdb.com/installationgallery633.htm?Picture=1

Big turnaround (with smaller one below it)

http://rcdb.com/installationgallery633.htm?Picture=2

Second turnaround near lift hill:

http://rcdb.com/installationgallery633.htm?Picture=3

Looking up into the big turnaround:

http://rcdb.com/installationgallery633.htm?Picture=4

Brakerun's approach to station:

http://rcdb.com/installationgallery633.htm?Picture=5

I think the train is coming off the lift hill and the hill in the foreground is the first camelback. After the first camelback is a straightaway with the trick track.

http://rcdb.com/installationgallery633.htm?Picture=6

This would be the hill in the foreground of the previous picture, which again I think is the first camelback:

http://rcdb.com/installationgallery633.htm?Picture=7

Queue entry with lifthill and second turnaround to the left. You can see the distance between the lift and second turnaround.

Enjoy your creating.

I have already recreated The Boss in RCT2, you can find it in coasterbuzzgames. The Boss is a very hard coaster to build in RCT2, because the wooden coasters in the game can't do what The Boss really does. The Boss in the game loses to much speed and you have to use lifts where there really is no lifts. The Boss in real life is one of the wildest coasters ever built, but it does not look like that in RCT2.

If you would like to do your own recreation then check out the pictures at rcdb.com(pictures from top of the 4 big hills) and also check out coastergallery.com for some other Boss photos.

My recreation of the boss is in with my SFSL recreation, it turned out pretty good.

It's kinda hard to make Villian in RCT 2. You almost have to improvise on some of the sections of the ride in order for it to come out "somewhat" correct. I've come pretty close in getting it right...the only problem is, my only problem, is instead of using 6 trains like it is on the ride, I had to use 8 trains.

-----------------