I have two coasters with stations touching, and I set up the synch and set them off and they just sit there. They wont go or do anything.
(Two inverted coasters)
Any answer to my problem?
Did you build an entrance and exit for both rides?
My dueling coasters don't work with stations in opposite directions. Are your inverts dueling like that?
------------- Everything above was my opinion.If you disagree,please respond in an intelligent fashion.But before you post,I warn you that some people say I'm just too smart to understand. Please take that into consideration.
Also check to make sure both rides are open and make sure that neither has a delay. It works. I've done it many many times.
Are the "station platforms" the same length (or at least end at the same place)?
I tried to build a dueling invert with the lift hills off set by one block (two 6 block stations, parallel and touching, but off set by one block) and it wouldn't work. I made them EXACTLY side by side and they worked. Well... at least they both launched at the same time. As for the dueling action working... forget it... I couldn't pull that off.
------------- "Resistance is futile... you will be assimilated." The BORG's (and Six Flags') motto.
I have a question. How would I be able to make a 4 lane wooden coaster (racer), all equel to the same heights and the same width of the tracks. Example: Gemini, Grand National or Collous?
They do go in seperate directions...
Okay.. there's something for the RCT2 wishlist.. Synch that works in all and every direction =)
-bw
The front (with the stop lights) pieces of the stations have to be touching for the synch to work... even if they are facing opposite directions. If you have those touching it should work. It does for me.
if your really desperate just pause the game then hit the test button for both. The unpuase the game.
