How can one build triple or quad racing coasters?
Just align the stations. As long as the little red and green lights are touching each other, they will run together. Don't forget to go to the gears on the two or three ride windows and click syncronize wiht adjacent stations. Then test them.
Yes but for triple & quad you need to make the outside stations shorter than the inside to place ride entances and exits.
if you have the CF:EP than there is a scenario that has a quad racing one
Hey, anyone know that you can do 6 racing/dueling? I'm working on one now, steel twisters. Really cool, i've never seen someone mention 6 though, took some thinking on my part.
That would be hard to do considering you only have 3 different radius turning track pieces. a small, medium and a large. They all fit so that they are right next to each other. To do six would take a piece of track to go further ahead then turn.
-----------------
Shawn Bailes
Webmaster of Coasters R Us
http://coastersrus.home-page.org
Yeah it was tough, but the hardest part was just trying to figure out how to align the stations, took awhile. I'm in the process of theming all six, its taking quite awhile. All the steel twisters turned out really good, surprisingly. The excitements range from 8 to 9.7, I think, and no intensities go over 9. Anyway, when I'm done I'll make it available somewhere.
For triple racers you don't have to leave a space in between stations....just make the back of the middle station longer..this leaves room for entrances and exits....and one of the tracks works its way around the longer station
For triple racers you don't have to leave a space in between stations....just make the back of the middle station longer..this leaves room for entrances and exits....and one of the tracks works its way around the longer station
