CAD designing

Sunday, January 14, 2001 5:29 PM
I just got a professional CAD software and was wondering if anybody has an occupation that uses CAD or just knows CAD, because I would like to start using it for ride layouts and whatever my imagination comes up with. So I would like to have a little tutorial from someone if they have time. I would greatly appreciate the help! *** This post was edited by smoothncomfy on 1/14/2001. ***
+0
Sunday, January 14, 2001 6:12 PM
i know alot about CAD...just the basics though..its pretty easy...but i recomend going to the bookstore and picking up a book...if you need some help,let me know...what program do you have?,autoCAD?
+0
Sunday, January 14, 2001 6:14 PM
I have intelliCAD 2000
+0
Sunday, January 14, 2001 6:32 PM
I have some degree saying I am trained in AutoCAD 98. The difference between the newer version, AutoCAD 2000 and some older ones like AutoCAD release 14 are minimal, in the basics anyway. It is easy and a book pretty much taught me how to do it.

OSNAP will be your best friend. *** This post was edited by Joe E. on 1/14/2001. ***
+0
Sunday, January 14, 2001 8:33 PM
I know the basic commands for AutoCADR14 if that helps any.

-------------
C:/
C:/DOS
C:/DOS/RUN
RUN/DOS/RUN
+0
Monday, January 15, 2001 8:46 AM
I have a degree in AutoCAD, and I have used it everyday for the past 3 years at work. If you need any help or have any questions, e-mail me. I've tried using it to design roller coasters but it doesn't work very good. There is probably some type of roller coaster CAD system out there.
-------------
What is life without ups and downs!?!? *** This post was edited by Josh the coaster freak on 1/15/2001. ***
+0
Monday, January 15, 2001 11:28 AM
I work with Turbocad,Mastercam,and megacad.
+0

You must be logged in to post

POP Forums - ©2018, POP World Media, LLC
Loading...